Fault Indicators

Kashef-001 Kashef-101 Kashef-002 Kashef-201 Kashef-004 Kashef-601

KASHEF 601

Overhead Smart Fault Passage Indicator

The EECL-SFPI is a Smart Fault Indicator installed on overhead power lines to detect and indicate fault events such as short circuits or earth faults. it provides real-time visual indication in addition to remote SMS & SCADA alerts using built-in GPRS modem, enabling faster fault localization and reducing outage response times.

Fault Detection Coverage

Permanent Fault (Red LED)
Transient Fault (Red + Green LED)
Earth Fault (Red + Blue LED)

Indication Visibility

From all directions during day and night.

Self-Powered Operation

Using built-in PV panels and EMF power harvesting technology.

Bluetooth Wireless Connection

For local configuration, fault test/reset, measurements & record review using the EECL Fault Indicator App for Android.

Remote Alerts & Measurements Reporting

Reporting the Fault Alerts & Line Parameters measurements to Operators & SCADA using SMS and IEC104/MQTT Communication protocol

Download Data Sheet Download Operation Manual

Technical Specifications

KASHEF 601 technical specifications.

Item	Specification
OEM	EECL
Country	Saudi Arabia
Products name	Smart OHL Fault Passage indicator integrated with Cellular Communication.
Model	EECL-SFPI
Installation	Outdoor installation. Bare/Isolated conductor.
Conductor cable diameter	10mm up to 27mm
Operation voltage	<70KV
Operation frequency	50HZ/60hz
Product dimensions	Length:200 x width:92mm
Product Weight	<1kg
Indicator group	3 PCS per set. Master (installed with SIM card). Slave. Slave.
SIM card size	Standard size
Communication model Frequency Bands	LTE-FDD B1/B2/B3/B4/B5/B7/B8/B28/B66 GSM/GPRS/EDGE 850/900/1800/1900MHz
Max. measured current	1500A
Effective measure current	Min. 1A, Max.1000A
Min load requirement	Zero load
Trip current setting	1~1000A configurable, 1A step
Short circuit fault current delta setting	1~1000A configurable, 1A step
Grounding fault current increment delta setting	1~1000A configurable, 1A step
Response (delay) time	40~1000ms, configurable, 20ms steps.
Re-closing time (Breaker waiting time)	1~900s, configurable, 1s steps.
Faults detection types	Phase to phase Phase to ground
Fault Indication Method	High Lamination 360° LED blinking. Permanent Short Circuit: RED Color LED. Transient Short Circuit: RED + GREEN Color LEDs. Earth Fault: RED + BLUE Color LEDs.
Indication Visibility Distance	During Night > 1000m. During Day > 100m.
Reset Types	Voltage & Current restoration Automatic reset. Timer Automatic reset. Local Manual reset via Android App. Remote Reset via SCADA
Automatic Reset Timer	1 ~2880 min (1 min to 48hr) Configurable, steps of 1 minute.
Power Supply	PV Recharging. EMF Recharging.
Battery	Model: 16500/17500. Capacity: 3.7V*1200mAh Quantity: 2 PCS
Smart power on/Off switching	Cellular Communication can be switched on/off easily by passing magnet near the device to save battery during the device being stored.
Cellular Network Bands	GSM/EDGE:850,900,1800MHz. WCDMA:B1,B2,B5,B8. FDD-LTE:B1,B3,B4,B5,B7,B8,B28. TDD-LTE:B40.
Radio Communication	2.4G, Bluetooth
Protocol	IEC60870-5-104, Indicator as a Master, SACAD Side as a Slave.
SMS function	Max. 10 phone number registered
Configurations	Android APP "EECL OHL Indicator"
Current withstands	25KV/160ms
Battery life	>10years
Indicating time	>1500 hours
Working temperature	-10 °C to +75°C
Protection grade	IP68
STANDARDS/TESTS	01-SDMS-01 / 38-SDMS-05 IEEE 495 IEC 60068-2-11 IEC 61000-4-2 IEC 61000-6-2 IEC 62689 IEC 60870-5 IEC 61850